Discover How to Save an Extra 15% on Your Fuel Bills…

With Advanced Weather Compensation Boiler Controls from Viessmann

With ever increasing fuel bills and the need to be as eco-friendly as possible, it’s important that we all look for ways to save fuel and carbon emissions – and money!

All boilers now have to be condensing boilers and this represents a huge step forward in environmentally friendly heating, with fuel savings of up to 35% compared to conventional boilers.

But there is a way to save even more – up to 15% in fact, with just a simple outdoor sensor and some very clever Weather Compensation controls, available with the Vitodens range of condensing boilers.

For a relatively small investment you’ll not only save up to 15% more fuel each year but you’ll also enjoy an incredibly comfortable home – with a pleasant indoor temperature – whatever the weather.

Heating – the basics

Our homes need heating, to replace heat lost through the walls etc. The colder it is outside, the more heat is lost and the more we have to heat the building, to replace that heat, especially in the winter when the heat loss is at its highest level.

This basic explanation is fundamental to understanding how an outdoor weather sensor can help to heat your home in a more efficient and cost-effective way.

Weather compensation controls work by ensuring that the boiler burns the exact amount of fuel required to match the heat lost from the building.

The house will always be warm (at the desired temperature) and will never be too hot or too cold.

Weather compensation significantly improves efficiency under partial load conditions and is especially relevant for the UK climate, as for two thirds of the year the boiler will provide only a fraction of its maximum heat load, which means the boiler temperature is reduced for the majority of the year, while still maintaining a constant room temperature of 20ºC.

Only around 15% of the home’s total heat energy usage is consumed during winter temperatures between -3 to -10ºC.

How does it work?

A small temperature sensor is located on the outside of the building, on a north facing wall. This is wired to the internal controls of the boiler and information about the outside temperature is sent to the boiler controller constantly.

When the temperature changes outside the boiler responds and starts to increase or decrease the radiator temperature to compensate.

This pro-active mechanism means that people inside the building won’t even notice that the temperature has changed outside.

For example, when the outside temperature drops at night, more heat is lost through the walls of the building.

Because the outdoor sensor detects the fall as soon as it happens, the boiler is able to raise the radiator temperature and keep the inside temperature stable.

With a conventional system, the temperature is dependent on a room thermostat, which will only take effect after the inside of the building has become too hot or too cold.

In summary, weather compensation controls enable the boiler to respond to outside temperature changes and adjust the radiator output, to maintain a constant temperature indoors.

 

Comments are closed.